 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
OPTO-MECHANICS
 | |  | |  | |  |
PHM PIN HOLE MOUNT
:
To avoid dirty and damage of pin hole effectively Mounted In
outer-diameter 4mm pin hole
PH-X high-energy pinhole
used to realize super small point source of light in the light path,
laser beam filtering, etc., Ø8mm diameter, thickness of 0.08 mm
pin hole
X= pin hole diameter available from 5 to 120 microns
:
To avoid dirty and damage of pin hole effectively Mounted In
outer-diameter 4mm pin hole
PH-X high-energy pinhole
used to realize super small point source of light in the light path,
laser beam filtering, etc., Ø8mm diameter, thickness of 0.08 mm
pin hole
X= pin hole diameter available from 5 to 120 microns
FH-7/16 FILTER HOLDER
Hold different thickness optical element .
Holds Large Plates of Filters
Maximum Plate Thickness:7 mm (FH-7) and 16 mm (FH-16)
Universal Design to use with Metric Post
This heavy-duty plate holder is a useful general purpose
mount for holding large exposure plates or filters. hole
provides additional flexibility allowing mounting directly onto
breadboards or other mounts.
Hold different thickness optical element .
Holds Large Plates of Filters
Maximum Plate Thickness:7 mm (FH-7) and 16 mm (FH-16)
Universal Design to use with Metric Post
This heavy-duty plate holder is a useful general purpose
mount for holding large exposure plates or filters. hole
provides additional flexibility allowing mounting directly onto
breadboards or other mounts.
FH-M MULTIPLE FILTERS HOLDER
It holds up to four filters of 50mm in width , and 5mm in
thickness.
Can provide with Teflon spacers if needed.
The holder can mount on the standard carriage directly
or on post.
It holds up to four filters of 50mm in width , and 5mm in
thickness.
Can provide with Teflon spacers if needed.
The holder can mount on the standard carriage directly
or on post.
FH-300 FILTER MOUNT
Filter Mount, 4mm Thickness
Used in holography and other optical experiments, for a fixed dry plates,
film, etc., the inner piece of elastic fixed rigid top plate thick stem, the outer
gripping film with a thin film of spring, loading and unloading easy, suitable
for chamber operation. Card installed width adjustable, high universality.
◆Holding thickness：4mm
◆Holding Width：35～300mm
◆Weight：0.55kg
◆Outside optic thickness: <2mm
◆Inside optic thickness:>35mm
◆Accessories: PPE, or can be fixed to optical table directl
IRIS-n,m IRIS DIAPHRAGM
n= MAX, m=MIN DIAMETER
Available n=1.2 to 2.5 mm and m=12 to
42 mm
IRIS-1.2,12
IRIS-1.5,22
IRIS-2.5,43
n= MAX, m=MIN DIAMETER
Available n=1.2 to 2.5 mm and m=12 to
42 mm
IRIS-1.2,12
IRIS-1.5,22
IRIS-2.5,43
IRIS-H1/2/3 IRIS DIAPHRAGM HOLDER
IRIS-H1 for IRIS-1.2,12
IRIS-H2 for IRIS-1.5,22
IRIS-H3 for IRIS-205,43
IRIS-H1 for IRIS-1.2,12
IRIS-H2 for IRIS-1.5,22
IRIS-H3 for IRIS-205,43
FH-V V FILTER HOLDER
1.Opening structure is convenient for loading and unloading
optical plate.
2.Two sides with no contact design can protect optical pate
from being scratched or bonding together
3.V support and hand wheel lock, strong and safe.
4.Hold thickness: 3 mm
1.Opening structure is convenient for loading and unloading
optical plate.
2.Two sides with no contact design can protect optical pate
from being scratched or bonding together
3.V support and hand wheel lock, strong and safe.
4.Hold thickness: 3 mm
FIBER HOLDER
Details&Spec:
T can fix microscopy objective, Screw is counterbore 6.5
and 10.5
Details&Spec:
- Tx： 6mm
- Ty： ±2mm
- Tz： ±2mm
- θy： ±4°
- θz： ±4°
- Weight： 0.4Kg
T can fix microscopy objective, Screw is counterbore 6.5
and 10.5
FIBER HOLDER
Tx,Tz: ±2mm
θy,θz： ±4°
It can use with FC-1 bare fiber;
Tx,Tz: ±2mm
θy,θz： ±4°
It can use with FC-1 bare fiber;
SPACIAL FILTER WITH PIN HOLE
It will restore the laser beam which can effect the energy distribution in
transmission as the defect of optical device through the air particle
scattering. This is very important for many optical experiment and related
research especially for holographic fields and optical data processing.
- Equipped with standard microscopic objective mount and pinhole
mount.
continuous quantitative the distance between adjustment objective and
pinhole.
- Stable movement and high precision with precision linear ball guide
rail pair as guide rail. - Pinhole mount driven by two M6*0.25 fine thread screw to achieve
two dimensional precisely adjustment of pinhole
Position.
Technical parameter:
Objective adjusting range Tx 13mm
Pinhole adjusting range Ty,Tz ±1.5mm
Micrometer head minimum reading 0.01mm
Adjustment accuracy 0.005mm
FC-1 Fiber Chuck Holder
Securely hold optical fibers from 0.08 mm
to 0.2 mm diameter, Positioners and
Couplers, Remove and replace fibers
repeatedly without damage
Securely hold optical fibers from 0.08 mm
to 0.2 mm diameter, Positioners and
Couplers, Remove and replace fibers
repeatedly without damage
FC-2 Fiber Chuck Holder
Securely hold optical fibers from 0.2
mm to 1.5 mm diameter
Fiber chucks hold fibers in our Fiber
Positioners and Couplers, Remove
and replace fibers repeatedly without
damag
Securely hold optical fibers from 0.2
mm to 1.5 mm diameter
Fiber chucks hold fibers in our Fiber
Positioners and Couplers, Remove
and replace fibers repeatedly without
damag
| HOLDERS |
