HTMM-CH-02 Optical Mirror Mount SET
1/4-100 Fine thread screw adjustment with High stable
spring reset
Mounting holes in two directions
Installation Diameter 13/25/30/38mm
Aperture Diameter 11/22/27/35mm
Adjustment Angle ±5°
Mirror Mount Threaded rings
Weight 0.16kg
1/4-100 Fine thread screw adjustment with High stable
spring reset
Mounting holes in two directions
Installation Diameter 13/25/30/38mm
Aperture Diameter 11/22/27/35mm
Adjustment Angle ±5°
Mirror Mount Threaded rings
Weight 0.16kg
PLH-X Circumferential with 360 ° score
Can be used to adjust polariscope or cylindrical
mirror
Elastic hand wheel, two point support of teflon, It’s
easy and stable for installation.
Can be used to adjust polariscope or cylindrical
mirror
Elastic hand wheel, two point support of teflon, It’s
easy and stable for installation.
HTMM50-02 Optical Mirror Mount
1/4-100 Fine thread screw adjustment with High stable spring
reset
Mounting holes in two directions.
Optic Diameter 50mm
Clear Aperture 47mm
Angle Adjustment ±4º
Install Mode Threaded ring
Weight 0.16kg
1/4-100 Fine thread screw adjustment with High stable spring
reset
Mounting holes in two directions.
Optic Diameter 50mm
Clear Aperture 47mm
Angle Adjustment ±4º
Install Mode Threaded ring
Weight 0.16kg
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
UK-SCIENTIFIC LTD.
 | |  | |  | |  |
OPTO-MECHANICS
LH25/ LH50 FIXED LENS HOLDER
Fixed lens or any optical element of 25/50mm, can
fix on stud using center M6 through hole, or on
optical carrier 10, 20,30,40 & 65 by two M4 screws
and two 4mm studs .
Using microscope objective adapter MOA can adapt
any standard microscope objective lens to LH25.
Fixed lens or any optical element of 25/50mm, can
fix on stud using center M6 through hole, or on
optical carrier 10, 20,30,40 & 65 by two M4 screws
and two 4mm studs .
Using microscope objective adapter MOA can adapt
any standard microscope objective lens to LH25.
MH3-XO THREE KNOBS MIRROR HOLDER
X=mirror diameter 12,20,25,30,38,50 &76
Tilt range 9° (about two axes)
Travel range 4 mm
Sensitivity 3 arc sec and 1µm
Mounting on either of 2 sides
X=mirror diameter 12,20,25,30,38,50 &76
Tilt range 9° (about two axes)
Travel range 4 mm
Sensitivity 3 arc sec and 1µm
Mounting on either of 2 sides
PL-X (A) POLARISER / FILTER HOLDER
Polariser holder ,360 degree rotation adjustment along light axis,
(a) with YAW,PITCH and ROLL adjustment.
X=12,25 and 30
Polariser holder ,360 degree rotation adjustment along light axis,
(a) with YAW,PITCH and ROLL adjustment.
X=12,25 and 30
MH3
DRAWING
DRAWING
DRAWING
Microscope objective adapter to LH-25 and
fixed on HL-20
fixed on HL-20
