 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 | |  | |  | |  |
RAILS
RT-100 ALUMINUM TRIANGULAR RAIL
Aluminum triangular rail of 1000mm length with scale
Aluminum triangular rail of 1000mm length with scale
HL-X CARRIERS (X= WIDTH mm)
4.5mm and 6.5 mm through holes, in distribution to fit any optical element
holder.
HL-20 20mm width
HL-30 30mm width
HL-40 40mm width
HL-65 65mm width
4.5mm and 6.5 mm through holes, in distribution to fit any optical element
holder.
HL-20 20mm width
HL-30 30mm width
HL-40 40mm width
HL-65 65mm width
HT-1 CARRIER FOR TRIANGULAR RAIL
Black anodized Aluminum carrier , fit on
triangular rail and moves smoothly and fit
tightly by thumbscrew
with M6 threaded center hole and four M4
threaded holes
Black anodized Aluminum carrier , fit on
triangular rail and moves smoothly and fit
tightly by thumbscrew
with M6 threaded center hole and four M4
threaded holes
Triangle rigid rails of one meter length with scale those are rigid and can fit any bench or table,
and can fix by a spacial base plate on any optical bench as option, it is optical element holder,
post or post holder.
Flat rails, which are slotted for bolting to M6 or 1/4-20 threaded surfaces, those are of 250,500
and 1000mm in length. The carriers for those rails are of 10,20,30,40 and 65mm width.
Flat rails mostly use low hight setups getting the center of mass as low as possible.
and can fix by a spacial base plate on any optical bench as option, it is optical element holder,
post or post holder.
Flat rails, which are slotted for bolting to M6 or 1/4-20 threaded surfaces, those are of 250,500
and 1000mm in length. The carriers for those rails are of 10,20,30,40 and 65mm width.
Flat rails mostly use low hight setups getting the center of mass as low as possible.
DRAWING
RL-X LOW PROFILE RAILS (X=LENGTH CM)
Black anodized Aluminum rails, use for different
applications. The rails are slotted for bolting to M6 or 1/4-20
threaded surfaces.
.
RL-25 250mm
RL-50 500mm
RL-100 1000mm
Black anodized Aluminum rails, use for different
applications. The rails are slotted for bolting to M6 or 1/4-20
threaded surfaces.
.
RL-25 250mm
RL-50 500mm
RL-100 1000mm
Optical element holder can fix on the
carrier by two pins, two M4 screw and one
M6 screw for more stablity
carrier by two pins, two M4 screw and one
M6 screw for more stablity
